If you don't have the right tools and knowledge, welding stainless steel can be difficult. When it cools, stainless reacts to heat by warping and distorting. All things are stainless. This means that if you heat weld too much, you will see the heat marks in the metal as well as any distortion. You should also be careful when welding on a table made of metal.
A heat sink, such as aluminum or brass, is one of the best ways to weld stainless steel. The clamp is a 3/8 brass piece behind the seam of the welding. This absorbs heat and prevents any burning.
The key to stainless is to use as little heat as possible, especially when working with thin materials. It is worth taking extra time to ensure that the heat sinks are in place before you begin your weld.Tungsten inert gas stainless welding will allow you to weld the seam completely without interruption.
After the weld pool has solidified, you can touch the tungsten to your metal and keep it there until your gas stops flowing. The color will return to the weld depending on how long you hold the tungsten until it reaches the end of its weld.
If you wanted to weld the pipe into its center, so you left the bottom open. The base will warp and twist regardless of how small the welds were. It all depends on the thickness of your material. This is 14 gauge material.
To prevent the base from warping, you will need a frame. There are many ways to fix the base. below or an angle iron frame.So choose the best way of stainless welding for your business.